ASENWARE CONVENTIONAL MANUAL CALL POINT (AW-D135-C)
₱930.00
The AW-D135C Conventional manual call point is designed to be use with an intelligent two-wire control system. If it is pressed after a fire is manually confirmed, an alarm signal may be sent to a fire alarm control system which will, after receiving the alarm signal, display the equipment status of the manual fire call points. When the manual fire call points is operating normally, the red indicator will blink; when there is a fire alarm, it will remain lit.
This passage will introduce the features, installation, wiring and use of AW-D135C conventional manual call point, to help you understand more about the conventional manual call point.
How To Install Conventional Manual Call Point
The AW-D135C conventional manual call point can be semi-recessed or mounted on the wall surface. When installing, this manual call point has to be installed in the order of base, middle cover, and top cover. Fix the base on the wall, then attach the middle cover to the base, and finally attach the top cover to the middle cover.
The size of the base is 87mm×7mm×33mm (L×W×H), the mounting hole diameter is φ5mm, and the fixed hole spacing is 36mm.
How To used Conventional Manual Call Point
1.Activation
When a fire occurs, press the button in the middle of the manual call point, then the manual call point will send a fire signal to the fire panel, and the LED indicator will be on.
2.Reset
After the manual call point is done using, it is necessary to reset it with the reset key, so that the conventional manual call point can be in a normal state again and get ready for the next use.
1.Conventional Manual Call Point Appearance
The AW-D135C conventional manual call point is made of ABS, weights about 95g, and its color is red.
2.LED Indicator
The AW-D135C conventional manual call point has a LED indicator. When the manual call point is under the normal state, the indicator will flash regularly. When the manual call point is under alarm state, the indicator will remain on.
3.Conventional Manual Call Point Working Environment
The AW-D135C conventional manual call point is better to work under the temperature range of -10 to 55°C, and the environment’s relative humidity is better to be less than 95% (non-condensing).
4.Application
This conventional manual call point is suitable for indoor use, in order to better achieve product performance.
5.Executive Standard
This conventional manual call point complies with the EN54-11 standard. With excellent reliability and high stability, this manual call point is safe and easy to use.
Technical parameters
Model
AW-D135C
Main Voltage
Zone 24V or 12V
Operating current
monitoring status≤20uA, alarm status≤15mA
Application
For indoor use only
Wiring
The promise of two bus system(Zone +, Zone -)
Indicator
Red alarm indicator flashes when it is under normal condition,
press the manual button lit work
Protection class
IP30
Environmental
Class A temperature range: -5 to 40°C (23~104°F)
Humidity: 5 to 95% RH, non-condensing